Inconel 600 (UNS N06600) Seamless Pipes & Tubes Manufacturer & Supplier

Alloy 600 (Inconel 600, UNS N06600) is a nickel-chromium alloy with good oxidation resistance at high temperatures and resistance to chloride-ion stress corrosion cracking. It is widely used in the nuclear industry, chemical processing, and for components that must resist caustic environments.

UNS: N06600 | Category: Nickel Alloy | Werkstoff Nr: 2.4816 | EN Name: NiCr15Fe

Size Range

Outer Diameter: 1/4" NPS to 10" NPS (6.35mm to 273.1mm OD)

Wall Thickness: SCH 5S to SCH 80S

Chemical Composition (%)

NiCrFeCMnSiCuS
72.0 min14.0-17.06.0-10.00.15 max1.00 max0.50 max0.50 max0.015 max

Mechanical Properties

Tensile Strength
550 MPa min
Yield Strength
240 MPa min
Elongation
30% min
Hardness
90 HRB max

Physical Properties

Density
8.47 g/cm3
Melting Range
1354-1413 C
Thermal Conductivity
14.8 W/m-K
Electrical Resistivity
1030 nOhm-m
Specific Heat
444 J/kg-K
Coeff. of Thermal Expansion
13.3 um/m-C

Corrosion Resistance

Pitting Resistance (PREN)
N/A (Ni alloy)
Max Service Temp (Oxidizing)
1175 C
Intergranular Corrosion
Good when solution annealed
Stress Corrosion Cracking
Excellent resistance in caustic
General Corrosion Rate
Excellent in alkaline environments
Seawater Resistance
Good

Applicable Standards

Applications

Industries Served

Key Advantages

Equivalent Grades

ASTM
N06600
Trade
Inconel 600
DIN
2.4816

Frequently Asked Questions

What is the chemical composition of Alloy 600?

Alloy 600 contains Ni 72.0 min, Cr 14.0-17.0, Fe 6.0-10.0, C 0.15 max, Mn 1.00 max, Si 0.50 max, Cu 0.50 max, S 0.015 max (weight %).

What are the mechanical properties of Alloy 600?

Tensile Strength: 550 MPa min; Yield Strength: 240 MPa min; Elongation: 30% min; Hardness: 90 HRB max.

What are the equivalent grades of Alloy 600?

Nearest equivalents of Alloy 600: N06600 (ASTM), Inconel 600 (Trade), 2.4816 (DIN). Equivalents are close matches, not identical; confirm against the governing standard.

Which standards does Stancor Aerospace supply Alloy 600 to?

Alloy 600 is supplied to ASTM B167 / ASME SB167, ASTM B163 / ASME SB163, ASTM B516 / ASME SB516 and DIN 17751.

What sizes of Alloy 600 are available?

1/4" NPS to 10" NPS (6.35mm to 273.1mm OD).

What is Alloy 600 used for?

Alloy 600 is used for Nuclear reactor components, Chemical and food processing, Furnace components and heat treatment, Caustic evaporators, Aerospace and gas turbine components and Electronic and thermocouple sheathing.