Inconel 601 (UNS N06601) Seamless Pipes & Tubes Manufacturer & Supplier

Alloy 601 (Inconel 601, UNS N06601) is a nickel-chromium alloy with aluminum addition that provides outstanding oxidation resistance to 1250C. The aluminium content forms a tightly adhering oxide scale that resists spalling under thermal cycling conditions.

UNS: N06601 | Category: Nickel Alloy | Werkstoff Nr: 2.4851 | EN Name: NiCr23Fe15Al

Size Range

Outer Diameter: 1/4" NPS to 10" NPS (6.35mm to 273.1mm OD)

Wall Thickness: SCH 5S to SCH 80S

Chemical Composition (%)

NiCrFeAlCMnSiCuS
58.0-63.021.0-25.0Remainder1.0-1.70.10 max1.00 max0.50 max1.00 max0.015 max

Mechanical Properties

Tensile Strength
550 MPa min
Yield Strength
205 MPa min
Elongation
30% min
Hardness
90 HRB max

Physical Properties

Density
8.11 g/cm3
Melting Range
1301-1368 C
Thermal Conductivity
11.2 W/m-K
Electrical Resistivity
1190 nOhm-m
Specific Heat
448 J/kg-K
Coeff. of Thermal Expansion
13.75 um/m-C

Corrosion Resistance

Pitting Resistance (PREN)
N/A (Ni alloy)
Max Service Temp (Oxidizing)
1250 C
Intergranular Corrosion
Good
Stress Corrosion Cracking
Excellent
General Corrosion Rate
Superior in oxidizing atmospheres
Seawater Resistance
Good

Applicable Standards

Applications

Industries Served

Key Advantages

Equivalent Grades

ASTM
N06601
Trade
Inconel 601
DIN
2.4851

Frequently Asked Questions

What is the chemical composition of Alloy 601?

Alloy 601 contains Ni 58.0-63.0, Cr 21.0-25.0, Fe Remainder, Al 1.0-1.7, C 0.10 max, Mn 1.00 max, Si 0.50 max, Cu 1.00 max, S 0.015 max (weight %).

What are the mechanical properties of Alloy 601?

Tensile Strength: 550 MPa min; Yield Strength: 205 MPa min; Elongation: 30% min; Hardness: 90 HRB max.

What are the equivalent grades of Alloy 601?

Nearest equivalents of Alloy 601: N06601 (ASTM), Inconel 601 (Trade), 2.4851 (DIN). Equivalents are close matches, not identical; confirm against the governing standard.

Which standards does Stancor Aerospace supply Alloy 601 to?

Alloy 601 is supplied to ASTM B167 / ASME SB167, ASTM B163 / ASME SB163, ASTM B516 / ASME SB516 and DIN 17751.

What sizes of Alloy 601 are available?

1/4" NPS to 10" NPS (6.35mm to 273.1mm OD).

What is Alloy 601 used for?

Alloy 601 is used for Thermal processing equipment, Radiant tubes in furnaces, Combustion chambers and afterburners, Petrochemical cracker tubes, Mesh belts for glass annealing and Catalytic converter substrates.