Titanium Grade 2 (UNS R50400) Seamless Pipes & Tubes Manufacturer & Supplier

Titanium Grade 2 (UNS R50400) is the workhorse commercially pure titanium grade, offering an exceptional balance of corrosion resistance, formability and weldability at roughly 56% the density of steel. Its self-healing TiO2 passive film makes it immune to seawater, oxidizing acids and wet chlorine, and its low ionic leaching suits ultra-pure water and semiconductor wet-processing service.

UNS: R50400 | Category: Commercially Pure Titanium | Werkstoff Nr: 3.7035 | EN Name: Ti Grade 2 / Ti99.5

Size Range

Outer Diameter: 1/4" NPS to 6" NPS (6.35mm to 168.3mm OD)

Wall Thickness: SCH 5S to SCH 40S

Chemical Composition (%)

TiFeOCNH
Remainder0.30 max0.25 max0.08 max0.03 max0.015 max

Mechanical Properties

Tensile Strength
345 MPa min
Yield Strength
275-450 MPa
Elongation
20% min
Hardness
N/A

Physical Properties

Density
4.51 g/cm3
Melting Range
1660-1670 C
Thermal Conductivity
16.4 W/m-K
Electrical Resistivity
560 nOhm-m
Specific Heat
523 J/kg-K
Coeff. of Thermal Expansion
8.6 um/m-C

Corrosion Resistance

Pitting Resistance (PREN)
N/A (passive TiO2 film)
Max Service Temp (Oxidizing)
425 C
Intergranular Corrosion
Immune
Stress Corrosion Cracking
Immune in chlorides
General Corrosion Rate
<0.005 mm/yr in seawater, nitric acid and wet chlorine
Seawater Resistance
Outstanding - immune to pitting and crevice corrosion

Applicable Standards

Applications

Industries Served

Key Advantages

Equivalent Grades

ASTM
Grade 2
Trade
CP Titanium Gr.2
DIN
3.7035

Frequently Asked Questions

What is the chemical composition of Titanium Grade 2?

Titanium Grade 2 contains Ti Remainder, Fe 0.30 max, O 0.25 max, C 0.08 max, N 0.03 max, H 0.015 max (weight %).

What are the mechanical properties of Titanium Grade 2?

Tensile Strength: 345 MPa min; Yield Strength: 275-450 MPa; Elongation: 20% min; Hardness: N/A.

What are the equivalent grades of Titanium Grade 2?

Nearest equivalents of Titanium Grade 2: Grade 2 (ASTM), CP Titanium Gr.2 (Trade), 3.7035 (DIN). Equivalents are close matches, not identical; confirm against the governing standard.

Which standards does Stancor Aerospace supply Titanium Grade 2 to?

Titanium Grade 2 is supplied to ASTM B338 / ASME SB338, ASTM B861 / ASME SB861, ASTM B862 and DIN 17861.

What sizes of Titanium Grade 2 are available?

1/4" NPS to 6" NPS (6.35mm to 168.3mm OD).

What is Titanium Grade 2 used for?

Titanium Grade 2 is used for Semiconductor wet-bench acid piping (HNO3, chromic and mixed acids), Ultra-pure water and DI water heat exchangers, Seawater condensers and desalination, Chlor-alkali and bleaching plants, Pharmaceutical and food-grade heat exchangers and Chemical process cooling loops.